Rubber Electrical Dry Air Vulcanization Vessel-manufacture,factory,supplier from China

After vulcanization, rubber products often need some post-treatment before they can become qualified products.

1. The function of the rubber vulcanizerThe rubber vulcanization tester (referred to as the vulcanizer) is used to analyze and measure the scorch time, positive vulcanization time, vulcanization rate, viscoelastic modulus and vulcanization flat period of the rubber vulcanization process. Research the compound formulation and testing equipment for testing product quality.Manufacturers of rubber products can use vulcanizers to test product reproducibility and stability, and to design and test rubber formulations.

Vulcanizing autoclaves are used by the rubber industry to convert natural rubber into a cured and cross-linked vulcanized rubber product. Vulcanizing autoclaves can also be used to cure plastics. Vulcanizing autoclaves use live internal steam, a mix of live steam and hot air, or hot-air only. Vulcanizing autoclaves are used to cure tires, hoses, and many other products.Hydraulic system of vulcanizing tank: cover closing, cover locking and other actions in the operation of vulcanizing tank are completed by the hydraulic system.

Introduction to Rubber Industry Vulcanization Tank Rubber industry vulcanization tank is an essential piece of equipment used in the production process of rubber products. Vulcanization is a chemical process that converts natural rubber or other polymers into a more durable material by adding sulfur or other additives.

Press roller for copierHigh temperature resistant, wear-resistant, foam powder, etc.Used for various types of copiersSilicone rubber rollerHigh temperature resistant, non adhesive plastic, etc.For hot plastic resin adhesive bonded plastic woven collar lining cable etc.Butyl rubber rollerResistance to acetate, cyclohexanone and other medium, good air tightness)Used in leather, plastic and other industriesRubber roller CStrong acid strong alkali resistance, ozone resistance of 3 l: K S% X1 _!Used in printing and dyeing, metallurgy, plastics and other industriesThree ethylene propylene rubber rol

Autoclaves are giant chambers that hire excessive pressures and temperatures to facilitate industrial processes. They are typically used to expose gear and substances to high-temperature saturated steam for decontamination or sterilization applications. However, they additionally have many different uses, such as in vulcanization operations.Vulcanization is a chemical technique utilized to rubber or different herbal compounds with elastomeric properties.

Press roller for copierHigh temperature resistant, wear-resistant, foam powder, etc.Used for various types of copiersSilicone rubber rollerHigh temperature resistant, non adhesive plastic, etc.For hot plastic resin adhesive bonded plastic woven collar lining cable etc.Butyl rubber rollerResistance to acetate, cyclohexanone and other medium, good air tightness)Used in leather, plastic and other industriesRubber roller CStrong acid strong alkali resistance, ozone resistance of 3 l: K S% X1 _!Used in printing and dyeing, metallurgy, plastics and other industriesThree ethylene propylene rubber rol

The correct way of storage is: wash the rubber roller with clean water, then seal it with plastic film, preferably not to let it contact with air, then put it in a special storage place, do not fall east and west, affecting its internal mechanical properties and the quality of the rubber surface.The internal bearings and shaft head need to be well lubricatedWe suggest that in the daily situation, it is better to make some maintenance to the rubber roller used every week, and the lubrication of its rubber surface and internal must be good enough.

The production process of rubber rollers generally follows several steps, including preparation of rubber material, molding of rubber rollers, vulcanization of rubber rollers, and surface treatment. So far, most enterprises still rely on manual intermittent unit based production. In recent years, with the continuous development of injection, extrusion, and winding technologies, rubber roller molding and vulcanization equipment has gradually put rubber roller production on the fast lane of mechanization and automation.

A, the pressure between the rubber rollers is too heavy pressure between the rubber rollers will increase the friction between the rubber rollers, make the rubber rollers warm up and heat up, aggravate the squeeze expansion between the rubber rollers, accelerate the aging and deformation of the rubber rollers, accelerate the emulsification process of ink and water, which is not conducive to the transfer of ink.The solution is: the pressure between the rubber rollers should be basically the same as the pressure of the contact layout.